Component reconstruction in the primary space of spectra and concentrations. Alternating regression and related direct methods

A set of methods that extract the spectral components in a chromatographic run is considered. The methods do not need libraries of previously known spectra or retention times. The methods have been developed for two-dimensional spectra but they can also be used for chromatographic analyses with a single-channel detector. The methods are direct; they do not use principal components as the starting point. Alternating regression (AR) remains in the primary space of spectra and concentrations during the calculations. Random numbers are used as the starting spectra. Regression is used to solve first for the concentrations, then for the spectra. The method uses two kinds of constraints: all spectra and concentrations are forced to be positive; and all concentration profiles are forced to a unimodal shape with a single local maximum. It is assumed that all observations are a linear sum of components. Compact alternating regression (CAR) is a new variant of the basic AR. The idea is to replace multiplication of a large matrix by two multiplications of smaller matrices. This typically speeds up the iterations by a factor of ten. AR and CAR have been successfully used with combined techniques such as gas chromatography—mass spectrometry and liquid chromatography with UV—visible detection. The reliability of the solution is checked by repeatedly injecting noise and performing the analysis several times. This produces estimates of confidence intervals. AR and CAR have recently been extended to handle single-dimensional signals. Examples are single-channel detectors such as the flame ionization detector in gas or liquid chromatography with a fixed-wavelength UV detector. A batch of samples is used as the observation matrix. As a result, one obtains both the concentrations and the elution shapes of individual chromatographic peaks.     

Temperature and humidity aging of poly(p-phenylene-2,6-benzobisoxazole) fibers: Chemical and physical characterization

In recent years, poly(p-phenylene-2,6-benzobisoxazole) (PBO) fibers have become prominent in high strength applications such as body armor, ropes and cables, and recreational equipment. The objectives of this study were to expose woven PBO body armor panels to elevated temperature and moisture, and to analyze the chemical, morphological and mechanical changes in PBO yarns extracted from the panels. A 30% decrease in yarn tensile strength, which was correlated to changes in the infrared peak absorbance of key functional groups in the PBO structure, was observed during the 26 week elevated temperature/elevated moisture aging period. Substantial changes in chemical structure were observed via infrared spectroscopy, as well as changes in polymer morphology using microscopy and neutron scattering. When the panels were removed to an ultra-dry environment for storage for 47 weeks, no further decreases in tensile strength degradation were observed. In a follow-on study, fibers were sealed in argon-filled glass tubes and exposed to elevated temperature; less than a 4% decrease in tensile strength was observed after 30 weeks, demonstrating that moisture is a key factor in the degradation of these fibers.     

Iridium mediated methyl and phenyl C-H activation of 2-(arylazo)phenols. Synthesis, structure, and spectral and electrochemical properties of some organoiridium complexes

Reaction of 2-(2′,6′-dimethylphenylazo)-4-methylphenol with [Ir(PPh₃)₃Cl] in refluxing ethanol in the presence of a base (NEt₃) affords an organoiridium complex 5, where the 2-(2′,6′-dimethylphenylazo)-4-methylphenol is coordinated to iridium, via C-H activation of a methyl group, as a dianionic tridentate C,N,O-donor. Two triphenylphosphines and a hydride are also coordinated to the metal center. A similar reaction carried out in toluene affords complex 5 along with a similar complex 7, where a chloride is coordinated to iridium instead of the hydride. Reaction of 2-(2′-methylphenylazo)-4-methylphenol with [Ir(PPh₃)₃Cl] in refluxing ethanol in the presence of a base (NEt₃) affords an organoiridium complex 12, where the 2-(2′-methylphenylazo)-4-methylphenol is coordinated to iridium, via C-H activation at the ortho position of the phenyl group in the 2′-methylphenylazo fragment, as a dianionic tridentate C,N,O-donor. Two triphenylphosphines and a hydride are also coordinated to the metal center. A similar reaction carried out in toluene affords a complex 12 along with a similar complex 13, where a chloride is coordinated to iridium instead of the hydride. Structures of complexes 5, 12 and 13 have been determined by X-ray crystallography. In all these complexes, the two triphenylphosphines are trans. All these complexes show intense MLCT transitions in the visible region. Cyclic voltammetry on all the complexes shows an Ir(III)-Ir(IV) oxidation within 0.60-0.73 V vs. SCE, followed by an oxidation of the coordinated 2-(arylazo)phenolate ligand within 1.08-1.39 V vs. SCE. A reduction of the coordinated 2-(arylazo)phenolate ligand is observed within −1.10 to −1.26 V vs. SCE.     

Application of Short-wave Near-infrared Reflectance Spectroscopy in Controlling Extract of Fructus Cnidii Using Supercritical Carbon Dioxide

Fructus cnidii （Chinese name shechuangzi） is the fruit produced by Cnidium monnieri （L.） Cusson （Umbelliferae）. It is a perennial herb that is used to treat skin-related diseases and gynecopathyell. Recent pharmacological studies have revealed crude extracts or components isolated from fructus cnidii possess antiallergic, antipruritic, antidermatophytic, antibacterial, antifungal, and antiosteoporotic activities. Osthole and imperatorin are the major compounds present in shechuangzi. They are often used as standards for the evaluation of the quality of shechuangzi products.     

η6-苊烯三羰基铬配合物的合成、结构及光谱性质研究

采用苊烯配体与三胺基三羰基铬在四氢呋喃中回流反应,合成了η6-苊烯三羰基铬配合物.通过元素分析、IR、1HNMR、13CNMR、MS和X射线单晶衍射对其结构进行了表征,比较了标题配合物与其自由配体的光物理行为.晶体结构分析表明,标题配合物属单斜晶系,空间群P21/c,Z=4,a=0.8719(7)nm,b=1.2436(10)nm,c=1.1504(9)nm,β=111.835(13)°,Cr(CO)3基团可与苊烯配体中的2个苯环中的任意一个配位,形成2个异构体(R,S),并以1:1的比例在其晶胞单元中反向面对面堆积,这种异构体共存于晶体中归属于Cr(CO)3基团在配体芳环之间的配位移动重排(IRHRs).     

固定波长同步荧光光谱参数的理论计算

基于荧光激发光谱和发射光谱对波长呈高斯分布的设定,本文推导出固定波长同步荧光光谱峰峰值位置、相对强度和半峰宽度等3个主要光谱参数的理论计算式。所提出的计算式应用于若干荧光物质光谱参数的计算,并和实测值、文献计算值作了对照。结果表明,和文献计算方法相比,本法与所研究物质的实际光谱参数较为接近,可为固定波长同步荧光光谱参数的理论计算提供一有效方法。     

Ag／Al2O3选择性催化丙烯还原氮氧化物表面反应机理的原位红外光谱研究

 在富氧条件下Ag／Al2O3对以丙烯为还原剂选择性催化还原NOx的反应有很高的催化活性．本实验成功地利用原位红外光谱分析手段,在真实的催化反应条件下,探讨了丙烯选择性还原NOx的反应机理,证实了催化剂表面反应中间体Al－NCO和Ag－NCO虽在真空中稳定,但在实际反应条件下极为活泼．催化剂表面上R－ONO和R－NO2分解成NCO是整个反应的速度控制步骤．这一结论与在真空系统条件下对其反应机理的研究结果一致,证明了在这一反应体系中两种研究方法的相关性．同时本实验还从反应机理上探讨了催化剂的水蒸气中毒现象．水蒸气的存在阻碍了催化剂表面R－ONO和R－NO2的生成,并进一步阻碍了反应的速度控 制步骤,即R－ONO和R－NO2向Al－NCO和Ag－NCO的转化,但这是一种完全可逆的暂时中毒现象．结合相应的催化剂活性评价结果对表面反应机理进行了讨论．     

偏最小二乘法结合傅里叶变换红外漫反射光谱快速测定煤质

发热量、挥发分和灰分等是衡量煤质的质量指标。通常,烟煤的发热量、挥发分和灰分是按行业标准方法[1]分别进行测定的,操作过程繁琐,速度慢,且费用高。随着化学计量学多元校正方法的发展与广泛应用,董庆年采用最小二乘法结合红外光谱成功测定了灰分[2];而应用偏最小二乘法[3](P     

Oxyreactive thermal analysis

The paper presents the applicability of Oxyreactive Thermal Analysis (OTA) for the investigation of different kinds of carbon matter. For comparative reasons and more precise interpretation, along with OTA some physico-chemical properties of analyzed materials were used as the methods commonly applied for the investigations. The carbon materials of both natural (anthracites, graphite and diamonds) and synthetic origin (active carbon, glass carbon, expanded graphite, soot and synthetic diamonds) were investigated. It was stated that there is close relationship between structure parameters and physico-chemical properties and the thermal reactivity within the investigated groups of carbon matters. The results show that OTA can be accepted as a good investigative way for such materials. This revised version was published online in July 2006 with corrections to the Cover Date.     

Untersuchungen zurFriedel-Crafts-Reaktion. XVI. Darstellung isomerer 2-Acyl- und 3-Acyl-4-methoxyphenole

Acylation of 4-methoxy phenol according toFriedel andCrafts, as well as the rearrangement of its esters according toFries lead always to 2-acyl-4-methoxy phenols or to their demethylated compounds. The unknown 3-acyl-4-methoxy phenols were prepared in two steps: First, the ester is acylated with the corresponding acyl chloride and SnCl₄ in nitromethane. In the second step the resulting ketoesters are hydrolysed. This is a general method. The yields ofmeta-acylphenols are between 40 and 90%. The isomeric 2-acyl-4-methoxy-phenols which were partly unknown or accessible only in low yields have also been prepared for comparative spectral studies (UV, IR, NMR, MS) ofortho- andmeta-acylphenols.